Process Description

the raw riverstone are collected into the hopper from the loader or truck, then the riverstone are fed into the jaw crusher PE600X900 by the vibrating feeder GZD960X3800 for primary crushing. Then the outputs are transported to the standard type cone crusher CSB160/C, during this moving, there will be a de-ironing separator RCYD-8 above the belt conveyor to collect the iron. After crushed by the cone crusher, the outputs are transported to the first vibrating screen 4YZS1860 for primary screening. Then the outputs between 0-5mm are transported into the sand washer XSD-2816, After washing, a portion of final products are finished. Then the outputs bigger than 15mm are transported back to the cone crusher CSB160/C for a second crushing circle. The outputs 5-15mm are collected into the motor vibrating feeder GZG100-4 via belt conveyor, then being put into the vertical shaft impact crusher 5X1145 for the third crushing, after crushing, the outputs are transported to the vibrating screen 4YZS2160 for second screening. Then the outputs between 0-5mm are transported into the sand washer XSD-3016, After washing, another portion of final products are finished. Then the outputs bigger than 5mm will be back to the vertical shaft impact crusher 5X1145 for another crushing circle. It is a circle crushing line, the riverstone will be crushed again and again until all the output size below 5mm.

Advantage of CSB

1.Have many types of crushing cavity. The CS series cone crusher possess special design, and the customers can choose the type of crushing cavity which has high efficiency,uniform granularity, good shape, uniform abrasion and long use life of bowl liner and mantle. Choose special material to manufacture key assemblies to support large crushing force.
2.High capacity. Compared with other types of crusher, the series of CS cone crusher has longer arm, large stroke, high crushing force, it can crush the material more efficiently.
3.Every stroke crushes more material.
4.The mantle of cs series cone crusher leaves bowl liner further in every stroke, so the crushed material is much more at every stroke, and the material pass through the cavity more quickly. As a result, the capacity is creased by many times.
5.Low cost of daily running and maintenance.